Suzhou Beakeland Machinery Co., Ltd.
Supply Quality Plastic Machinery, Create Value for Waste Plastics!
Add to Cart
PET Recycling Machinery
Description:
Post-consumer PET bottles are doubtless among the most important components of the Plastic Recycling Plant. Recycled PET may be used in a wide variety of final applications, with very interesting and remunerable financial returns for the recycling companies.
After many years of development, our systematical equipment production line and overall technical tread have become mature, with choice to make according to the different requirements of customers. We use the mode of modularity to arrange smartly according to the different characteristics of recycled bottle all over the world, to achieve the best production and lowest input.
Customers can have PET bottle crushing washing recycling machine line to produce high quality PET flakes for selling, drawing filament, producing PET particles or blowing bottles.
PET recycling Machinery PET bottle plastic recycling machine washing line process:
Models&specifications of PET recycling Machinery:
| Model | BKL-500 | BKL-1000 | BKL-1500 | BKL-2000 | BKL-3000 |
| Capacity(kg/h) | 500 | 1000 | 1500 | 2000 | 3000 |
| Installation Power (kw) | 150 | 250 | 300 | 400 | 500 |
| Man power | 4-6 person | 6-8 person | 8-10 person | 10-12 person | 12-16 person |
| Water supply | 4-5m3/hr | 8-10m3/hr | 8-12m3/hr | 10-15 m3/hr | 20-30 m3/hr |
Brief introduction of the equipments for PET recycling machinery
PET bottle plastic recycling machine washing line:
| Machine | Function |
| Bale opener | Open the baled PET bottles into individual bottles, controlled by inverter |
| Trommel sortor | This section allows the removal of many of the solid contaminants (sand, stones, etc.). |
| Label remover | This section can remove the bottle labels by friction between screen and arms. |
| Pre-washing machine | This section is essential for the line to be able to accept the worst quality PET bottles, continuously removing large and abrasive contaminants. |
| Manual sorting belt | The manual sorting conveyor consists of a horizontal conveyor belt with platforms on side, discharge chutes and a discharge conveyor for centralized contaminant disposal (optional – on demand). |
| Wet Grinder | In this section, PET bottles are cut into smaller pieces to achieve the required size distribution for the washing sections that follow. |
| Hot water washing machine | Washing the flakes from labels, dirt and other residues by water heated to 85℃. Overflow on top of washing chamber, remove cups and rest of the paper. |
| Friction washing tank | The flakes are efficiently cleaned insight inclining drum with blades on rotor turning 1,200RPM.Flakes are rubbing against each other as well as against the rotating auger. The auger moves the flakes forward and clean last remain of dirt. |
| Floating washing tank | It can separate the material according their density. PET sinks to the bottom and is discharged by a screw conveyor. Remains of caps and rings made of PE and labels of PP floats on the top and are moved by rotating shovels to side of washing tank. Small screw conveyor take them out. This machine removes 90% of paper and plastic labels. |
| Centrifugal dryer | The wet flakes are dewatered in horizontal centrifuge. Flakes are dry to 2.5% of humidity. |
| Zig-zag air classifier | Separation ensures label separation rate >99.5%, powder <1% |
| Drying system | Heating the flakes by electricity, the moisture can be lower than 1% |
| Storage silo | The dried and separated flakes are then packaged from the storage silos into super sacks with a high density filling system. |
Photos of PET Recycling Machine: